Gyokucho Razorsaw ZA 240mm

Product Description

Gyokucho Razorsaw ZA

• Blade Length : 240mm
• Overall Length : 540mm TPE
• Max Cutting Depth : 55mm
• Teeth Pitch / TPI: 1.5mm / 16.9
• Blade Thickness : 0.3mm
• Cutting Width : 0.51mm
• Teeth Pattern: Crosscut
• Gyokucho Product Number : 307TPE
• Weight : 240g TPE
• Replacement Blade : S306

A very useful crosscut saw with a curved tipwhich will work in most materials including softwoods and hardwood (not exotics), OSB, MDF, ply,laminates. The curved tip will allow you to start a cut in the middle of a board. The crosscut teeth are fine enough to allow you to use if for dovetails. It is actually one of Christopher Schwarz’s suggested saws if you are starting out in woodworking as he calls it a ‘workhorse’.

The Gyokucho Razorsaws cut on the pull stroke. The blades are thin, but the teeth are very tough: perfect for making smooth, clean and precise cuts. Each tooth is impulse hardened and heated 0.003 to 0.005 seconds one at a time, making only surface of each tooth very hard. The hardened teeth is harder than sharpening file, so with correct use will stay sharp for many years to come. The blades are nickel plated which helps prevent rust, and will also assist in stopping gunk such as sap getting stuck to the blade. As the blade is nickel plated you can wipe them down with warm soapy water, but we still suggest drying the blade.

No need to use excessive power, let the weight of the saw do the work.

Made in Miki City, Japan.

View other products in Gyokucho Dozuki »